10 Best dial caliper review List And Buyer’s Guide By Expert

If you have been searching for the dial caliper review then you have come to the right place. For this post, I have put together a collection of the best dial caliper review currently available.

dial caliper review

Are you still confused for how to select top dial caliper review? Then don’t buy before you read this review and guide. Compare and choose the best from our selection.

Take your time in reading through this dial caliper review review and trust that you would find the best that you would need.

First, let’s take a look at the top-rated dial caliper review, then we’ll read our full research review below to select the best product.

Image Product Name Rating Price
USER FRIENDLY

Anytime Tools Dial Caliper 6

Anytime Tools Dial Caliper 6″ / 150mm DUAL Reading Scale METRIC

Features: metal , Imported , Dial face reads in both inch (black)

4.7
Check Price
EDITOR’S CHOICE

Anytime Tools Premium Dial Caliper 0-6

Anytime Tools Premium Dial Caliper 0-6″/0.001″ Precision Double Shock Proof Solid

Features: Super high precision gears. Double Shock Proof , Precision Dial 0.001″ Graduation / 0.1″ Per , Measure External, Internal and depth

4.7
Check Price
BUDGET PICK

iGaging 6

iGaging 6″ Fractional & Decimal Inch Combination Dial Caliper

Features: Dual Scales: Inch and Fractional Displays , 4-Way Measuring Readout – Accuracy: +/- 0.001″ ,

4.7
Check Price
MY CHOICE

Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-706-0, 0-6

Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-706-0, 0-6″ Measuring

Features: ,

4.6
Check Price
TOP PICK

Shop Fox D3208 Fractional Dial Caliper

Shop Fox D3208 Fractional Dial Caliper

Features: Precision stainless steel construction , 4-way measurements: inside, outside, depth, and step , Micro fine black dial is graduated in

4.6
Check Price
HONEST PRODUCT

Accusize Industrial Tools 0-4 inch by 0.001 inch Precision Dial Caliper,

Accusize Industrial Tools 0-4 inch by 0.001 inch Precision Dial Caliper,

Features: Range: 0-4″, Resolution: 0.001”, 0.100″ single revolution, , Hardened stainless steel, satin chrome finish, crisp , Measuring face hardened, precision ground and micro-lapped

4.6
Check Price
No #1 PRODUCT

Anytime Tools Dial Caliper/Micrometer/Stainless Steel Ruler Professional Machinist Inspection Tool Set

Anytime Tools Dial Caliper/Micrometer/Stainless Steel Ruler Professional Machinist Inspection Tool Set

Features: Quality machinist grade inspection tool set , Dial Caliper: Measure 0-6″ @ 0.001 Graduations , Micrometer: Measures 0-1″ @ 0.0001 Graduations Carbide

4.6
Check Price
FOR THE MONEY

Mitutoyo 505-742-56 D6

Mitutoyo 505-742-56 D6″TX-6 Dial Caliper, Black Face, 0.1″/Rev, 0″-6″, 0.001″

Features: New designed dial movement for ultra smooth , Removal of Tin coating on sliding surfaces , Lock screw for dial bezel and for

4.5
Check Price
FOR YOU

Mitutoyo 505-742-51 D6

Mitutoyo 505-742-51 D6″TX-1 Dial Caliper, Blue Face, 0.1″/Rev, 0″-6″, 0.001″

Features: New designed dial movement for ultra smooth , Removal of Tin coating on sliding surfaces , Lock screw for dial bezel and for

4.5
Check Price
Cheap Product

Utility Dial Caliper - 6 Inch with 0.001

Utility Dial Caliper – 6 Inch with 0.001″ Precision, Stainless Steel,

Features: Steel construction caliper 6″ dial , Precision Ground Jaws for Accuracy , Jaws Designed for Inside, Outside, and Thread

4.3
Check Price

Best dial caliper review – Buying Guide And Recommendation

This top 10 best dial caliper review review starts by looking at the different technologies and then after lists the best products.

1. Anytime Tools Dial Caliper 6″ / 150mm DUAL Reading Scale METRIC

Anytime Tools Dial Caliper 6″ / 150mm DUAL Reading Scale METRIC SAE Standard INCH MM

  • metal
  • Imported
  • Dial face reads in both inch (black) and metric (red).
  • Hardened stainless steel throughout.
  • Inside, outside, step and depth measurement.
  • Raised sliding surface prevents wear and defacement of graduations.
  • Covered, stainless steel rack.
Most Frequently Asked Question:

1. Are these accurate and durable? How’s the quality of construction?

How accurate? Well, I wouldn’t use them for highly sensitive applications, but for general use they’re great. They measure to 0.001″ increments, so if that’s sufficient for your purposes, then very accurate. I’ve had my calipers for a year and have found them to be durable; they still look brand new. As for quality, I’d say they are very high quality especially considering the price.

2. is anyone able to shed some light on what this tool’s resolution might be? nothing is listed on this page by the manufacturer

OK, its not a Starrett, but it is also 1/8th the price. The smallest division on the dial is 0.001″ (0.02mm). After zeroing the tool, I can measure a single sheet of household aluminum foil at 0.0005″ and a doubled-up sheet of aluminum foil at 0.001″. It is a good tool!

3. Country of Manufacture? Think Amazon would get the clue to put this info on the product description.

The caliper itself & its plastic case provide no information about where it is made.For this high degree of quality & precision I would guess China, or Taiwan or maybe Korea – but that is just my guess.Anytime Tools is a California company and their online information says that they “purchase most merchandise in the USA from major USA brands”.You can contact them at cps@anytimetools.com and ask this question.I don’t know what the response would be – try it and see.

4. does your caliper say “shock proof” in the dial? I just got mine, and and it does not say shock proof anywhere on it

I bought the caliper when we were at our home in Tampa FL and left it there so I can’t look at the dial, but I do not remember it saying shockproof.I am satisfied with the operation and accuracy of the instrument. Do you mean electrically shockproof? It is metal and surely if exposed to a wire with voltage on it you could be shocked. If you are worried about the utility of the tool in a rough physical environment I would say it is fairly shockproof that way. Does the product description say it is “shockproof”. And even if so it would not necessarily have to have that written or stamped on the instrument.

What Real Customers Say About This Product?

CloverLeaf says: “These were compared with the measurements of a pair of Mitutoyo calipers that were made in Japan. Using a 123 Block (1″ x 2″ x 3″ that is ground to and accuracy of at least .0005”), these matched the Mitutoyo calipers exactly. Not a .0005 difference, exactly! These are a great buy, and to have both inch and mm measurements without being dependent on a battery is great. Would definitely buy another pair, and would recommend to others. BTW, I tried putting a ridiculous amount of pressure on the thumb wheel, and the measurement only moved half a thousandth. It looks
like it really is hardened steel, although I did not try to dent it with a center punch. So far, I love this set of calipers!.

Show More…

3. Anytime Tools Premium Dial Caliper 0-6″/0.001″ Precision Double Shock Proof Solid

Size Name:6″ Professional Precision Dial Caliper When it comes to calipers, Anytime Tools is the professionals choice. Quick and accurate measurement of Outside, Inside and Depth. Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Ultra Smooth operation. Precision Dial 0.001″ Graduation / 0.1″ Per revolution Range: 0-6″ Measure External, Internal and depth Solid Hardened stainless steel Thumb roll for rapid setting Knurled lock assures precise settings Padded case included

Anytime Tools Premium Dial Caliper 0-6″/0.001″ Precision Double Shock Proof Solid Hardened Stainless Steel

  • Super high precision gears. Double Shock Proof Design. Zero Parallel Tolerance. Smooth operation.
  • Precision Dial 0.001″ Graduation / 0.1″ Per revolution. Range: 0-6″.
  • Measure External, Internal and depth
  • Solid Hardened Stainless Steel
  • Padded case included
Most Frequently Asked Question:

1. Is this made in the USA?

No, but they are pretty nice

2. What is the size of the dial?

Approx 1 3/8″ diameter not including bezel, (the black ring around the outside.) 1 1/2″ diameter overall.

3. Does this read in millimeters

No

4. are these coolant resistant?

Of course their coolant proof, their not electronic/digital. You can even use them inside the Machine while the Machine is running if you measure fast.
What Real Customers Say About This Product?

Feedback says: “This is the second dial caliper I bought from Amazon. The first, a Fowler, which cost about 20 dollars more, I returned. I thought that the more expensive one would be better than the Anytime, but I was wrong. For comparison I’ll mention the Fowler’s drawbacks of which the Anytime has none. 1) The Fowler was very stiff and made my thumb sore. 2) The ruler was offset by about ten thousandths. In other words, when the dial was zero, the body did not line up with the ruler’s tick mark. 3) The dial needed to be zeroed, being off by
about 10 thousandths. To be fair after that the unit was accurate, provided you kept in mind the offset on the ruler. 4) The case was cheap.

In contrast, the Anytime is smooth and easy on the thumb. The ruler is not offset. It came zeroed spot on. It too is very accurate as compared to my micrometer and digital calipers. (While I have a supply of batteries, I am tired of the digital calipers blinking and shutting itself off.) Lastly, the Anytime case is hinged plastic with the calipers resting in foam.

With Mitutoyo manufacturing their calipers in Brazil and Starrett manufacturing theirs in China, I see no compelling reason to pay a premium for those. The Anytime is a great value and gives excellent mechanical and measurement performance. I highly recommend it..


Show More…

5. iGaging 6″ Fractional & Decimal Inch Combination Dial Caliper

Size:6″ This hardened stainless steel dial caliper features dual scales – a fractional inch scale with 1/64 inch graduations on the white outer scale and a Decimal inch scale with 0.01 graduations on the green inner scale. Comes packed in a padded plastic storage case.

iGaging 6″ Fractional & Decimal Inch Combination Dial Caliper

  • Dual Scales: Inch and Fractional Displays
  • 4-Way Measuring Readout – Accuracy: +/- 0.001″ per 6 inches
Most Frequently Asked Question:

1. Can this be calibrated?

Yes, it can be calibrated. This has become a great addition to my bench tools. I didn’t think I would use it as much as I do.

2. Can this caliper be locked at a given setting?

Yes. There is a locking screw next to the dial.

3. Does this also read metric on the tool. The picture shows it does.

Yes, the instrument reads to 150 millimeters directly in 1mm increments on the bar scale only. There is no fine scale millimeter vernier or fine scale incrementation on the rotary dial for reading millimeter. Rotary dial scale is graduated for “inch measurement only (1/64 inch fractional and .01decimal).

4. Is this product made in the United States?

I believe it was made in China
What Real Customers Say About This Product?

RugerDan says: “I bought the iGaging 6” Fractional & Decimal Inch Combination Dial Caliper as a backup to my 35+ year old plastic calipers to use for reloading ammo, woodworking, and general home repair measuring tasks. The storage case is well designed to keep it clean and prevent damage for storage and when carrying in your tool box or bag. I’ve actually retired the old calipers (even though they still work just fine). The iGaging calipers are my go-to tool now. Pro’s: these calipers are very well designed, rugged, easy to read, very easy to operate, a good value, and they look awesome
I bought the iGaging 6″ Fractional & Decimal Inch Combination Dial Caliper as a backup to my 35+ year old plastic calipers to use for reloading ammo, woodworking, and general home repair measuring tasks. The storage case is well designed to keep it clean and prevent damage for storage and when carrying in your tool box or bag. I’ve actually retired the old calipers (even though they still work just fine). The iGaging calipers are my go-to tool now.

Pro’s: these calipers are very well designed, rugged, easy to read, very easy to operate, a good value, and they look awesome in stainless steel. The dial part of the caliper is easy to read and easy to “zero” for accurate measurements. The dial remains in place as does the slide lock; no movement or free-play to give false readings. I did use my other calipers as a benchmark for determining accuracy of these new calipers, and they were right on the money. I find it really handy to read both the fractional and decimal conversions without wasting time doing the conversions either in my head or with paper and pencil. This helps prevent “Mr. Murphy” mistakes and is a real time saver.

Con’s: none

These calipers are perfect for all my needs and are well worth the money I spent..


Show More…

7. Fowler Full Warranty Stainless Steel Shockproof Dial Caliper, 52-008-706-0, 0-6″ Measuring

The Fowler Shockproof stainless steel dial caliper has dial graduations of 0.001″ with 0.001″ accuracy, shockproof anti-backlash control, a sliding jaw with a lock, and a covered rack. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Shockproof spring anti-backlash control with a heavy-duty spring offers increased accuracy over standard gear configurations.

Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. This caliper has a knurled lock screw to hold the sliding jaw in position and help ensure a consistent measurement.

A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. The caliper measures 0.10″ per revolution of the dial. The dial has 0.001″ graduations, and the beam has engraved 0.1″ graduations. The hardened stainless steel components, including the beam, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion.

An adjustable dial enables setting zero. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case. Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units.

An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it to take measurements. A circular dial indicator is fixed to the movable jaw on a toothed gear rack that transfers movement of the jaws to the dial needle. The base measurement is taken from the long beam, which provides the initial whole measurement in inches or centimeters, and added to the dial reading, which provides fractional measurements in inches or millimeters.

A locking mechanism provides the ability to take differential measurements for determining the difference in measurements between two objects. Compared to digital calipers, dial calipers are more durable, but are more susceptible to shock damage and prone to getting dirt in the gears, which can cause accuracy problems. Vernier calipers are more durable than dial calipers because they do not have internal moving parts, but they can be more difficult to read.

Dial calipers are commonly used in fields such as metalworking, mechanical engineering,

machining, and carpentry. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA. What’s in the Box? • Fowler Shockproof 0-6” dial caliper • Fitted case .”

Show More…
Most Frequently Asked Question:

1. It’s a Swiss style but doesn’t read in mm’s?

Does does not measure in metric.

2. Is this a 12inch ?

Measures lengths up to 6.5 inch. Tool is 9 3/8 inches long.

3. In the video, he mentions measuring “step” could elaborate what “step” is?

Good explanation at this link: https://www.wonkeedonkeetools.co.uk/calipers/how-do-you-use-a-vernier-caliper-to-measure-step/

4. Does the dial on these calipers turn to be zeroed out?

I just received my caliper yesterday and on mine the dial doesn’t rotate to be able to re zero. Its a piece of crap
What Real Customers Say About This Product?

QDuck says: “Accurate, typical Fowler quality. Not much else to say except that it’s pretty rugged too. I previously had a Craftstman dial caliperthat wore out and was replaced with a lesser known brand, digital caliper. The digital caliper was problematic, often needing a second reading to feel confident about the first and batteries had short life as caliper was stored in a cold garage. I went back to this dial and like it a lot. It’s always accurate and after several months of use it’s a pleasure to take it out, measure something once and put it back feeling confident the reading
was correct. My Craftsman caliper was nearly 40 years old. This caliper appears to be of equal or better quality so I expect many years of service from it.

One note: Many of the sales sites show this caliper is a sturdy, heavy plastic case with cushioned liner. The case supplied is a actually a more flexible, look-through plastic with plastic lining. The lining is the type of plastic that after a few years cracks and falls apart. You also need two hands to open the case, an inconvenience that I don’t like..


Show More…

9. Shop Fox D3208 Fractional Dial Caliper

From the Manufacturer This 6-Inch stainless steel Fractional Dial Caliper combines metalworking precision with a fractional scale for woodworkers. Perfect for measuring board thickness, depth and inside dimensions. Dial reads 64th and 0.01-Inch.

Shop Fox D3208 Fractional Dial Caliper

  • Precision stainless steel construction
  • 4-way measurements: inside, outside, depth, and step
  • Micro fine black dial is graduated in 0.01 Inch
  • Six inch capacity
Most Frequently Asked Question:

1. does it state anywhere if the stainless is hardened?

Yes, it is stamped on the caliper “stainless steel hardened”

2. Where is this manufactured? Anyone know?

This is manufactured in China.

3. Does this caliper have the ability to lock at a specific size? I see a little knob under the dial, is that to lock the size down so that it wont move?

I believe that the knob under the dial is to allow calibration by moving the dail face.There is a knob at approximately the 1:30 position that allows you to lock a specific size in.You can’t see the knob in Amazon’s picture.I’ve taken a picture for you but I haven’t been able to figure out how to paste it into this reply.

4. is this item waranteed?

i cant’ remember. I have had mine at least a year. That is probably the extent of any warranty. It is a well made product; accurate, too. I can recommend it.
What Real Customers Say About This Product?

Timbo Slims says: “I was looking for a second caliper for woodworking to complement my Starrett caliper – and this fit the bill well. I use the Starrett caliper in my shop for precision measurements when dimensioning wood for projects, or for measuring parts for assembly, or other shop tasks. The problem was, I needed something to use outside in my carport where I store my wood, and where I do rougher cutting tasks. I did not want to bring my 100$ Starrett outside for these “rougher” measuring tasks, plus you know how it is – once you bring the caliper to another location,
you forget to bring it back in making it very inconvenient when you need it in the shop. Plus, outside there was more of a chance of dropping the caliper, and the Starrett at $100+ was not the right tool.

When I saw this Shop Fox caliper on Amazon, I bought it primarily because of the price. I did not want to buy too cheap a caliper that it was not accurate, and the reviews here helped to make a decision on this one. I also require a caliper to have fractional readings, as this is critical for woodworking.

The big surprise was how good this caliper ended up being – it is a very good buy. For those woodworkers on a budget, this may be all you need. It is well built, sturdy, accurate, and comes with a nice storage case that works well. It has all the locking mechanisms to hold a measurement, and the hold well. Basically, it has all the features of the 100$ Starrett caliper I own, but for $70 cheaper. I would like to say that the Starrett is more accurate and durable to justify why it costs so much more, but I am not 100% certain of that. This caliper is well made, and I don’t see it breaking any time soon.

In fact, look closely at the side by side pictures below of the $100 Starrett caliper and the $30 Shop Fox caliper. We live in an era where there are times where products being sold under different brand names at different price points are really made in the same overseas factory. When you compare these two calipers side by side – it becomes clear that they are VERY similar in design / manufacture, all the way down to the screws. Sure the knurled knobs have different textures, the face has a different color / appearance, and other finishing touches that distinguish them products end up being. And the kicker – look at the weight of the two calipers – near identical. A one gram difference is negligible, and could be the difference of the type of knurled knobs used.

For me, standing here holding, comparing, using these two calipers – I would deduce they were made in the same location. Maybe Starrett uses higher quailty stainless steel, maybe they have a higher standard / tolerance for preicsion, maybe there are differences that the eye cannot see. But, I am having trouble seeing those differences in measuring, using. And the fact they weigh the same points to being made of the same composition material / metal. Am I saying these two calipers, $70 apart in price, might actually have the same origin? Well, yeah, I am. The bottom line is, knowing what I know now, I am not sure I would spend $100 for the Starrett.

What I like about this caliper:

– It has fractional measurements on the face, which are graduated to 1/64th of an inch – which is nice for woodworking.
– It returns to zero accurately every time – at least mine does consistently.
– It is made of stainless steel, and has a nice weight to it in use – the plastic ones don’t “feel” accurate.
– It comes with a nice storage case to protect it when not in use
– The locking mechanisms and roller work very well
– It cost only $30, and looks / feels / operates identically to a $100 Starrett

I would have no problem recommending this caliper as either a primary or a backup caliper – I am not sure about QC on these, but the one I received is accurate and has worked well repeatedly for over a year now.

Thanks for reading!.


Show More…

11. Accusize Industrial Tools 0-4 inch by 0.001 inch Precision Dial Caliper,

Size:0-4″ Range: 0-4″, Resolution: 0.001”, 0.100″ single revolution, direct reading to .001″ in large clear dial/.-100, accurate to .001” per 4″ Hardened stainless steel, satin chrome finish, crisp engraved graduations, covered rack, deluxe case Measuring face hardened, precision ground and micro-lapped for absolute accuracy, for fine adjustments Inside, outside, and depth measurements Clamp for repetitive setting

Accusize Industrial Tools 0-4 inch by 0.001 inch Precision Dial Caliper, Stainless Steel, in Fitted Box, P920-S214

  • Range: 0-4″, Resolution: 0.001”, 0.100″ single revolution, direct reading to .001″ in large clear dial/.-100, accurate to .001” per 4″
  • Hardened stainless steel, satin chrome finish, crisp engraved graduations, covered rack, deluxe case
  • Measuring face hardened, precision ground and micro-lapped for absolute accuracy, for fine adjustments
  • Inside, outside, and depth measurements
  • Clamp for repetitive setting
Most Frequently Asked Question:

1. What is the procedure for zeroing the dial on the 12″? Not rotating the bezel, but putting the pinion back in the right place after a tooth skip.

#1 slide open the caliper and clean the two flat (outside measuring jaws) surface that touches together when caliper is closed; so you don’t have any obstacles when taking the measurement.
#2 after completing procedure #1 slide open one inch or up to your desire and slide close the two flat (outside measuring jaws) holding it close with one hand, loosen up the bezel clamp roller and turn the dial graduation to the zero position followed by tighten the bezel clamp roller so the dial don’t move..
If you want to take outside measurement or inside measurement, this is the procedure that I use..

2. do all dial calipers have gears?

Yes, all of our high quality dial caliper have gears inside. we supply 4″, 6″, 8″, 12″ and heavy duty dial caliper such as 18″, 24″, 40″.

3. Where is this made? Thanks

Not sure but it’s is stainless steel, good quality and worth buying.

4. What is the depth of the “jaws”?

About 2-3/8 inches
What Real Customers Say About This Product?

Helen Troiashear says: “I did not want a digital caliper because I find that although convenient, a well made accurate dial caliper can consistently allow you close to 1/10,000″ accuracy if well maintained and not abused. I have run this caliper against several calibration blocks accurate to 5/100,000″ and other accurate calipers and it is definitely capable of holding 1/10,000” accuracy. Great for money. Well made and precise.
I did not want a digital caliper because I find that although convenient, a well made accurate dial caliper can consistently allow you close to 1/10,000″ accuracy if well maintained and not abused. I have run this caliper against several calibration blocks accurate to 5/100,000″ and other accurate calipers and it is definitely capable of holding 1/10,000″ accuracy. Great for money. Well made and precise..

Show More…

13. Anytime Tools Dial Caliper/Micrometer/Stainless Steel Ruler Professional Machinist Inspection Tool Set

Precision Inspection Set The 3 most commonly machinist inspection tools in one great package. 6″ Stainless Steel Caliper Features fully hardened frame and satin chrome finish, 1″ Outside Micrometer with carbide tipped anvils and ratchet stop 0-1 in. (.0001 Grad) and 6″ Stainless Steel Rule all Fitted in a plastic box. Features: Dial Caliper Measure 0-6″ @ 0.001 Graduations Shock Proof Stainless Steel Hardened Micrometer Measures 0-1″ @ 0.0001 Graduations Carbide Tipped Anvil Ruler Measures 0-6″ Stainless Steel Hardened

Anytime Tools Dial Caliper/Micrometer/Stainless Steel Ruler Professional Machinist Inspection Tool Set

  • Quality machinist grade inspection tool set
  • Dial Caliper: Measure 0-6″ @ 0.001 Graduations Shock Proof Stainless Steel Hardened
  • Micrometer: Measures 0-1″ @ 0.0001 Graduations Carbide Tipped Anvil
  • Ruler: Measures 0-6″ Stainless Steel Hardened
  • Molded case
Most Frequently Asked Question:

1. are these calibrated and certified calibrated?

They are trash don’t waste your money
What Real Customers Say About This Product?

C. Gall says: “The tools I got seem to hold their zero well. I had to work the caliper a bit to break it in cause the screw was a bit stiff when I first got it. I put a dab of oil in the groove that it rides along and it is very smooth now. This seems like a very nice tool for the money. I don’t think it would stand up to a lot of hard use, but as long as it gets taken care of I see not reason it wont last years.
The tools I got seem to hold their zero well. I had to work the caliper a bit to break it in cause the screw was a bit stiff when I first got it. I put a dab of oil in the groove that it rides along and it is very smooth now. This seems like a very nice tool for the money. I don’t think it would stand up to a lot of hard use, but as long as it gets taken care of I see not reason it wont last years..

Show More…

15. Mitutoyo 505-742-56 D6″TX-6 Dial Caliper, Black Face, 0.1″/Rev, 0″-6″, 0.001″

Mitutoyo 505-742-56 D6″Tx-6, Caliper, Dial, Black Face,.1″/Rev, 0-6″,.001″.

Mitutoyo 505-742-56 D6″TX-6 Dial Caliper, Black Face, 0.1″/Rev, 0″-6″, 0.001″

  • New designed dial movement for ultra smooth sliding and high shock protection
  • Removal of Tin coating on sliding surfaces without sacrificing wear life
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Can measure OD, ID, depth, and steps
Most Frequently Asked Question:

1. Is any part of the caliper plastic or is it fully constructed with metal?

The dial face is plastic, the rest of it is metal.

2. Where is this caliper manufactured?

I’m happy to take the time to answer this question because I think this is a superb caliper.It’s manufactured in Brazil.I use it almost daily.It’s beautifully finished, very accurate, smooth in operation and holds a setting superbly when locked.I couldn’t ask for a better one.

3. Does it come with a box?

Yes, it comes in a nice molded plastic box

4. Is it made Of hardened stainless steel

Hardened stainless steel construction.
What Real Customers Say About This Product?

Kokanut says: “I really like this tool! Very well made, smooth, easy to read dial. I had a caliper with white face and 0.200″ per revolution on the dial. the divisions on the dial were too small for these aging eyes. I really prefer having this new one with 0.100″ per revolution. This Mitutoyo comes back to zero every time and was right on with 0.032” feeler gauge. I actually have 3 cheaper dial calipers that i will now discard, they aren’t anywhere near as reliable as this new one.
I really like this tool! Very well made, smooth, easy to read dial. I had a caliper with white face and 0.200″ per revolution on the dial. the divisions on the dial were too small for these aging eyes. I really prefer having this new one with 0.100″ per revolution. This Mitutoyo comes back to zero every time and was right on with 0.032″ feeler gauge. I actually have 3 cheaper dial calipers that i will now discard, they aren’t anywhere near as reliable as this new one..

Show More…

17. Mitutoyo 505-742-51 D6″TX-1 Dial Caliper, Blue Face, 0.1″/Rev, 0″-6″, 0.001″

Mitutoyo 505-742-51 D6″Tx-1, Caliper, Dial, Blue Face,.1″/Rev, 0-6″,.001″.

Mitutoyo 505-742-51 D6″TX-1 Dial Caliper, Blue Face, 0.1″/Rev, 0″-6″, 0.001″

  • New designed dial movement for ultra smooth sliding and high shock protection
  • Removal of Tin coating on sliding surfaces without sacrificing wear life
  • Lock screw for dial bezel and for holding the sliding jaw position
  • Can measure OD, ID, depth, and steps

17. Utility Dial Caliper – 6 Inch with 0.001″ Precision, Stainless Steel,

Steel construction caliper 6″ dial, Precision Ground Jaws for Accuracy, Jaws Designed for Inside, Outside, and Thread Measurements, Slide Lock Holds Reading in Place

Utility Dial Caliper – 6 Inch with 0.001″ Precision, Stainless Steel, Shockproof by Science Purchase

  • Steel construction caliper 6″ dial
  • Precision Ground Jaws for Accuracy
  • Jaws Designed for Inside, Outside, and Thread Measurements
  • Slide Lock Holds Reading in Place
  • Complete with Plastic Storage Case
Most Frequently Asked Question:

1. Is this stainless steel? It says so on the caliper, but does not say stainless in description only steel.

Appears to be! Excellent calipers for the price!

2. Does it come with the case?

Yes. Very acceptable for home shop use. It’s got no calibration certification, but again good for a home shop. Caliper build quality certainly doesn’t measure up to a Starrett or Mitutoyo, but it couldn’t for this price.

3. Is it made in the usa or is it an import?

Definitely an import, wasn’t very smooth rolling, I would keep looking..

4. What are the outside dimensions of the case

The case dimensions are 1.08″ H x 9.75″ W x 3.579″ D
What Real Customers Say About This Product?

L. Haynes says: “I work at a local manufacturing company. Most of my co workers have their own pair to use and I am glad that I purchased this model. I even had it certified for accuracy. When you first get it, there is a light coating of an oil like cosmoline. This is normal to prevent it from rusting and use a lightweight oil, not wd30 either. There is a little bag that comes with it, re-use it, it’ll help. It’s not bad for the money and better than the plastic ones for longevity.
I work at a local manufacturing company. Most of my co workers have their own pair to use and I am glad that I purchased this model. I even had it certified for accuracy. When you first get it, there is a light coating of an oil like cosmoline. This is normal to prevent it from rusting and use a lightweight oil, not wd30 either. There is a little bag that comes with it, re-use it, it’ll help. It’s not bad for the money and better than the plastic ones for longevity..

Show More…

I hope this list of the best dial caliper review was helpful. If you think I left out one that is important or have a suggestion for a future article, let me know in the comments below.

Leave a Comment