The 10 Best Pressure Washer Gun – Complete Guide

If you’re willing to pay top dollar for absolutely gorgeous Pressure Washer Gun, this post is for you.

Pressure Washer Gun

Are you still confused for how to select top Pressure Washer Gun? Then don’t buy before you read this review and guide. Compare and choose the best from our selection.

Take your time in reading through this best Pressure Washer Gun review and trust that you would find the best that you would need.

Discover the excellence of Pressure Washer Gun when you refresh your collection of Pressure Washer Gun today. Here are the best Pressure Washer Gun you can buy.

First, let’s take a look at the top-rated Pressure Washer Gun, then we’ll read our full research review below to select the best product.

Image Product Name Rating Price
USER FRIENDLY

M MINGLE Short High Pressure Washer Gun, 5000 PSI, Replacement for

M MINGLE Short High Pressure Washer Gun, 5000 PSI, Replacement for

Features: ATTENTION: NOT FIT GARDENHOSE, WATERHOSE or Faucet , ATTENTION: NOT FIT GARDENHOSE, WATERHOSE or Faucet , ATTENTION: NOT FIT GARDENHOSE, WATERHOSE or Faucet

4.7
Check Price
EDITOR’S CHOICE

MTM Hydro Pressure Washer Trigger Gun, 5000psi Easy Pull

MTM Hydro Pressure Washer Trigger Gun, 5000psi Easy Pull

Features: Sold on Amazon ,

4.6
Check Price
BUDGET PICK

4000 PSI Pressure Washer Trigger Gun and 36

4000 PSI Pressure Washer Trigger Gun and 36″ Lance Combo

Features: Safety-off trigger lock: brass internal parts , Enables hose to enter pistol grip for , Deluxe: Inlet: 3/8″ Male Plug, Outlet: 1/4″

4.6
Check Price
MY CHOICE

M MINGLE Replacement Pressure Washer Gun with Extension Wand, M22 15mm

M MINGLE Replacement Pressure Washer Gun with Extension Wand, M22 15mm

Features: Universal pressure washer spray gun has M22 , Attention: Not fit gardenhoses, waterhose or your , Change the length of pressure washer gun

4.5
Check Price
TOP PICK

DUSICHIN DUS-220 Short Wand High Pressure Washer Gun,3000 PSI Max, 5

DUSICHIN DUS-220 Short Wand High Pressure Washer Gun,3000 PSI Max, 5

Features: 3000 PSI high pressure water gun body, , 5 pieces of high pressure water nozzles , Flow rate 3.0 GPM nozzles at 3600

4.4
Check Price
HONEST PRODUCT

DUSICHIN DUS-022 Short Wand High Pressure Washer Gun 3000 PSI for

DUSICHIN DUS-022 Short Wand High Pressure Washer Gun 3000 PSI for

Features: 3000 PSI high pressure water gun body, , 100% Brand New and High Quality , M22-14 Thread inlet fitting (inside diameter 14mm)

4.4
Check Price
No #1 PRODUCT

Amazon Basics Snow Foam Lance with 1/4 Quick Connector for Pressure

Amazon Basics Snow Foam Lance with 1/4 Quick Connector for Pressure

Features: This fits your . , Make sure this fits by entering your , Snow foam lance for cleaning cars, trucks,

4.4
Check Price
FOR THE MONEY

DUSICHIN DUS-018 Foam Cannon Lance Pressure Washer Nozzle Tip Spray Gun

DUSICHIN DUS-018 Foam Cannon Lance Pressure Washer Nozzle Tip Spray Gun

Features: 3000 PSI high pressure water gun body, , Adjustable snow foam lance for car cleaning , M22 Metric Male thread fitting

4.3
Check Price
FOR YOU

Tool Daily Deluxe Pressure Washer Gun, with Replacement Wand Extension, 5

Tool Daily Deluxe Pressure Washer Gun, with Replacement Wand Extension, 5

Features: ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet , If hose has M22 14mm fitting with , Replacement pressure washer gun has three lengths

4.3
Check Price
Cheap Product

Sooprinse High Pressure Washer Gun,3000 PSI Max with 5 Color Quick

Sooprinse High Pressure Washer Gun,3000 PSI Max with 5 Color Quick

Features: ❤【Premium Quality】The gun body is made of , ❤【Package Include】Includes high pressure washer gun,5 spray , ❤【Good Compatibility】1/4 inch outlet quick disconnect fitting,M22-14

4.3
Check Price

Best Pressure Washer Gun – Buying Guide And Recommendation

Below we have reviewed the best Pressure Washer Gun. From these products you can choose the product of your choice if you want.

1. M MINGLE Short High Pressure Washer Gun, 5000 PSI, Replacement for

M MINGLE Short High Pressure Washer Gun, 5000 PSI, Replacement for Hot and Cold Water, M22 Fitting, 5 Nozzle Tips

  • ATTENTION: NOT FIT GARDENHOSE, WATERHOSE or Faucet Directly. High pressure washer gun kit includes a short gun, a brass coupler (M22 14mm female to M22 15mm male) and five nozzle tips multiple degrees.
  • ATTENTION: NOT FIT GARDENHOSE, WATERHOSE or Faucet Directly. Power washer gun is designed for hot and cold water. Max Temperature for water is 160℃ (320℉). Working Pressure is up to 5000 PSI. Flow rate is rated to 8 GPM. Comfortable handle for easy operation. Trigger lock design can avoide mistake.
  • ATTENTION: NOT FIT GARDENHOSE, WATERHOSE or Faucet Directly. If pressure washer hose has M22 14mm fitting with 14mm inside diameter, connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, connect the brass coupler between gun and hose.
  • Pressure washer guns have a universal 1/4” quick connect for any accessory with 1/4” plug. Such as nozzle tips, pivoting coupler, foam cannon, water broom, undercarriage cleaner, surface cleaner.
  • 5 spray nozzle tips have different spray angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to your needs. Such as watering flowers and plants, washing car, washing fence and cleaning sidewalk.
Most Frequently Asked Question:

1. Dose it works with Karcher 140 bar ?

I couldn’t get it to fit with anything I do not recommend it. Sent it back

2. Will this fit a Simpson 3100 psi machine with the hardware supplied?

It should. I use it on My Simpson pressure washer. All I had to do is put my quick connect fitting on it. I keep one on all my wands so I can quickly change wands as needed.

3. Does the push button lock keep it spraying, or prevent it from spraying?

It locks it on. So it keeps spraying

4. Is the black forearm supposed to spin?

No
What Real Customers Say About This Product?

Ben Caldwell says: “wish I had bought this a long time ago – my pressure washer came with a 3 foot sprayer which makes pressure washer the side of a two story house while on a ladder difficult. This short pressure washer gun is PERFECT when you are up close or on a ladder. It is rugged and came with extra nozzles. it even has a button to keep the trigger pressed so you don’t have to squeeze the trigger. Excellent product I am very glad I found it – I’ve got a lot of pressure washing left to go on my house and
I’ll be using this short pressure washing gun a bunch. BTW I have a gas powered PW and the short gun handles the PSI easily.

Show More…

3. MTM Hydro Pressure Washer Trigger Gun, 5000psi Easy Pull

MTM Hydro’s SG35 Spray Gun featuring best in class “Easy Hold” technology. This Italian made gun is manufactured with shockproof reinforced plastic ribbing throughout the entire body of the gun supporting the pipe and protecting your hand.

Most Frequently Asked Question:

1. what features are different between this and the SG28?

Jimmy,
The SG35 has a higher pressure rating at 5000 PSI while the SG28 has a pressure rating of 4000 PSI. For most residential pressure washers, the SG28 will be more than sufficient to handle the cleaning power of your machine.
-Mike- MTM Hydro 866.686.4020

2. Is the trigger truly easier to pull? I use my machine for 3-4 hours a day so im looking for a gun with an easy trigger.

I bought this trigger for a foam gun from Adams polishes. It is the same thing as the $80 one that they offer. Very solid and quite comfortable. Seems to be relatively easy to pull and shouldn’t tire your hand too much!

3. Will the fittings work with a Ryobi 2000psi electric pressure washer?

You will need to get quick connection

4. What exactly is a Trigger Gun?

It is the control for the pressure washer to turn on and off with that in your hand
What Real Customers Say About This Product?

Billy Mullins says: “So far this item is a solid build and smooth trigger compared to the ones that come with pressure washers, those seem to have phoned it in compared to this build quality. I have a 4Gpm 4200psi pressure washer and went over the specs in case of future equipment upgrades to maybe a 10Gpm unit, this will still handle it with ease. I will be using this for pressure washing and also gear it so that I can attach a foam lance to wash my vehicle. Putting a coupler at the top I can attach a wand for pressure washing or
a foam lance with ease.

Also, purchase a stainless 3/8 male nipple for the bottom of the handle and stainless male coupler, 1/4 for the top connection for longer life over brass. I use this sealant tape .


Show More…

5. 4000 PSI Pressure Washer Trigger Gun and 36″ Lance Combo

Deluxe 4000 PSI 7 GPM Pressure Washer Gun and 36in. Wand & Couplers Safety-off trigger lock: brass internal parts Enables hose to enter pistol grip for easier handling Deluxe: Inlet: 3/8″ Male Plug, Outlet: 1/4″ female Maximums: 4000 PSI, 300°F, and 7 GPM Wand: 36″ Wand: Inlet: 1/4″ NPT-M, Outlet: 1/4″ Quick Connect for Nozzles

4000 PSI Pressure Washer Trigger Gun and 36″ Lance Combo

  • Safety-off trigger lock: brass internal parts
  • Enables hose to enter pistol grip for easier handling
  • Deluxe: Inlet: 3/8″ Male Plug, Outlet: 1/4″ female
  • Wand: Inlet: 1/4″ NPT-M, Outlet: 1/4″ Quick Connect for Nozzles
  • Maximums: 4000 PSI, 300 Degrees F and 7 GPM
Most Frequently Asked Question:

1. Will this fit a power washer Husky 1600

Not sure if it will attach immediately, but you can screw in the correct fitting at the base of the handle. Fittings are available at most stores that sell pressure washers. A well stocked hardware store should also have them

2. what country is it made in?

Boy, I am i glad you asked.Not sure of the country of origin, but this thing leaked from the get go.I tried to return and after calling the distributor, I complied with her instructions and never, after repeated attempts, got a response.All products are occasionally defective AND I understand, but that’s what returns are for.No dice here. I would not do business with this company.they are NOT Amazon, which is probably the most customer centric company in existence!

3. 4000 psi pressure washer trigger gun and 36″ lance combo, do i need a pressure washer to connect with this? i went to wash roofs, awnings, car

You need everything other than the trigger handle, 36″ extended wand. from the spray nozzle’s, hose and washer assembly it’s self.

4. Does this fit a Yardforce electric ?

It should, you just need to get the right connections to fit your hose
What Real Customers Say About This Product?

Dave says: “Replaced a Gun that came with my Husqvarna power washer. I went through 2 guns from the manufacturer and a hose. The original gun and hose were almost inseparable when you connected them. After two guns and a hose I attempted this one. I didn’t purchase this for the longer nozzle, it was simply because I has fed up, but to be honest the longer nozzle is a great benefit and after several weeks using this, it has been a godsend compared to the original manufactures gun.
Replaced a Gun that came with my Husqvarna power washer. I went through 2 guns from the manufacturer and a hose. The original gun and hose were almost inseparable when you connected them. After two guns and a hose I attempted this one. I didn’t purchase this for the longer nozzle, it was simply because I has fed up, but to be honest the longer nozzle is a great benefit and after several weeks using this, it has been a godsend compared to the original manufactures gun..

Show More…

7. M MINGLE Replacement Pressure Washer Gun with Extension Wand, M22 15mm

M MINGLE Replacement Pressure Washer Gun with Extension Wand, M22 15mm or M22 14mm Fitting, 5 Nozzle Tips, 40 Inch, 4000 PSI

  • Universal pressure washer spray gun has M22 14mm or M22 15mm fitting. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer.
  • Attention: Not fit gardenhoses, waterhose or your faucet directly. If pressure washer hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler between gun and hose.
  • Change the length of pressure washer gun based on your application. Easy to change pressure washer long gun to short gun. Three Length:40 inch, 25 inch, 8.8 inch. Replacement pressure washer trigger gun fits gas and electric pressure washer with M22 fitting.
  • 5 Spray Nozzle Tips: They have different spray angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to your needs. Such as watering flowers and plants, washing car. Max pressure is up to 4000 PSI.
  • Universal 1/4’’ quick connect for any accessory with 1/4’’ plug. Such as nozzles tips, pivoting coupler, foam cannon, water broom, undercarriage cleaner, surface cleaner.Comfortable handle design for easy operation. Trigger lock design for avoiding mishandling.
Most Frequently Asked Question:

1. Will this work/fit with a Husky 1550 electric power washer?

Husky 1550 pressure washer has special fitting at the end of pressure washer hose. It will not fits your hose. But you can buy new hose. It is cheap.
New hose:
M MINGLE Pressure Washer Hose 50 Feet X 1/4 Inch for Most Brands, Compatible M22 14mm and M22 15mm, 3600 PSI

2. Will this fit a green electric pressure washer from harbor freight?

What is the model? Portland 1750PSI? Please check the fitting at your original gun. If it is M22 male thread, this product fits.

3. will this work with the Husky 1750 power washer?

It is a very nice quality gun but you will probably need to buy a connector for it to attach to your hose. I found one at Fleet Farm for a couple dollars.

4. Will this be compatible for a generac power washer model 65950?

I have a Briggs
What Real Customers Say About This Product?

Erik Okerholm says: “Easy to put together and keep together (my previous had issues). Love the hand grip area. Easy to use. Definitely recommend.
Easy to put together and keep together (my previous had issues). Love the hand grip area. Easy to use. Definitely recommend..

Show More…

9. DUSICHIN DUS-220 Short Wand High Pressure Washer Gun,3000 PSI Max, 5

DUSICHIN DUS-220 Short Wand High Pressure Washer Gun,3000 PSI Max, 5 Pressure Power Washer Nozzles, 3.0 Tips

  • 3000 PSI high pressure water gun body, brass fitting
  • 5 pieces of high pressure water nozzles attached with different size
  • Flow rate 3.0 GPM nozzles at 3600 PSI
  • M22 Metric Male thread fitting
  • Make sure your pressure washer hose is 14mm diameter inside the M22 metric thread
Most Frequently Asked Question:

1. Does this have a trigger lock?

No, it does not. It only has a flip up plastic piece that prevents pulling the trigger backa trigger guard.

2. Will this work on a 1800 psi electric pressure washer ?

It should. It’s rated at 3000 psi. But more important is the size of the tips. Don’t know the formula off hand but you can go online and look it up at different pressure washer sites.

3. how can I purchase the water hose adapter?

I went to a local hose store and they had a whole rack of power washer components. the adaptors are common so you shouldnt have a problem.

4. What size o ring goes on this?

I don’t know the exact size. It was small like 3/8″. It is metric. I had a assorted box from Harbor freight. Any hardware store will have them.
What Real Customers Say About This Product?

Charles N. says: “This set is a good value the handle and tips work great. I use it for washing my vehicles and working a foam cannon. The short handle is easier to use than a long wand. I did notice a small leak behind the quick connect coupling during use , so I unscrewed it and applied some Teflon tape on the threads and it fixed that issue( just like all threaded pipe fittings under pressure , a good seal on the threads is important)
This set is a good value the handle and tips work great. I use it for washing my vehicles and working a foam cannon. The short handle is easier to use than a long wand. I did notice a small leak behind the quick connect coupling during use , so I unscrewed it and applied some Teflon tape on the threads and it fixed that issue( just like all threaded pipe fittings under pressure , a good seal on the threads is important).

Show More…

11. DUSICHIN DUS-022 Short Wand High Pressure Washer Gun 3000 PSI for

DUSICHIN DUS-022 Short Wand High Pressure Washer Gun 3000 PSI for Pressure Power Washers

  • 3000 PSI high pressure water gun body, brass fitting M22-14 Thread
  • 100% Brand New and High Quality
  • M22-14 Thread inlet fitting (inside diameter 14mm)
  • 1/4 inch outlet quick disconect fitting
  • Well made and great saving
Most Frequently Asked Question:

1. Will this fit my clean force 1400 pressure washer

Yes it should my electric washer is 1700 psi 1/4 to 3/8 it will fit you will need adapter for 1/4.

2. Can this handle 3100 psi?

I used it on my 3200PSI unit.
This ones just not that high quality,

To be honest I just upgraded to a MTM hydro SG28 from this and wow that other gun I s $32, it feels like $200.
Don’t get me wrong this gun is the cheapest and has a use but I out grew it

3. What size is the o-ring on the outlet connection side. (not where hose is attached)?

Not sure I had bought a o ring kit that had multiple sizes in it since you can’t just buy one single one

4. What is the threading on the outlet and what wand works with this gun?

The bottom threads are M22 14
Any wand will work that has a small quick connect on the end. For instance I have a few different lengths of extension lance that go out of the snub gun out to my pressure washer tip.
What Real Customers Say About This Product?

Ivan A. Gonzalez says: “I bought this Gun in hopes that I could finally stop using the Humongous PW rifle. I bought this one because I saw on Instagram some Guy Selling them for around $85 and I thought that was pretty ridiculous, I hopped on amazon and I found the exact same thing for $15 and I picked it up. All I could say it that I paid $15 and I wasn’t expecting the Best for $15 obviously, but once I used it. Wow it was much better than the Rifles that the Ryobi Pressure washers come with, I’m assuming that The Ones that
ryobi pressure washers come with usually tend to make less pressure after a while. I used this one to Detail a van and I began to Foam up the van pictured and it was making some Pretty thick foam. All I could say is don’t waste your time thinking that just because others used it and it didn’t work for them it won’t work for you, especially if you own a Smaller Pressure washer that doesn’t Push more than 2000 PSI. Make sure to pick up some QD Connections too it’ll be a bit more Functional and it makes Cleaning once you’re done a bit easier.

Show More…

13. Amazon Basics Snow Foam Lance with 1/4 Quick Connector for Pressure

An Amazon Brand

Amazon Basics Snow Foam Lance with 1/4 Quick Connector for Pressure Washer Gun, 33.8-Ounce (1-Liter)

  • This fits your .
  • Make sure this fits by entering your model number.
  • Snow foam lance for cleaning cars, trucks, and more; snow foaming lifts dirt and grime from a vehicle’s exterior for safer, scratch-resistant cleaning
  • Works with cleaning solution (not included) and a pressure washer (flow of at least 2.0 GPM and a minimum pressure of 70 bar-1000psi; not included)
  • Adjustable for accurate mixing and for creating desired level of foam; twist nozzle to produce proper spray pattern (narrow or wide)
  • Solid-brass main body for heavy-duty strength; durable ABS and aluminum components; 1/4-inch quick connection fitting; 0.2-gallon capacity
  • Measures 3.2 by 11 by 6.5 inches (LxWxH); backed by an Amazon Basics 1-year limited warranty
  • If the snow foam lance appears to not work well as before, please attempt to clear any obstructions from the nozzle.
What Real Customers Say About This Product?

Critter Creek says: “When you use a pressure washer, you shouldn’t run bleach or other harsh chemicals through the machine. It is OK to put some mild detergents made for pressure washers through the mixer, but, for the most part, it is better to use something like this foam lance for chemicals. I was using it for mold and mildew remover, bleach. It worked great. You can adjust the mix and the stream. I had no problem spraying this 10 feet to the top of my pool cage. I can’t want to use it for washing my car. I would recommend this to anyone
wanting to use chemicals with their pressure washer.

https://images-na.ssl-images-amazon.com/images/I/F11qF9uoOgS.mp4.


Show More…

14. DUSICHIN DUS-018 Foam Cannon Lance Pressure Washer Nozzle Tip Spray Gun

DUSICHIN DUS-018 Foam Cannon Lance Pressure Washer Nozzle Tip Spray Gun 3000 PSI Jet Wash

  • 3000 PSI high pressure water gun body, brass fitting, a pressure washer is needed to make it work
  • Adjustable snow foam lance for car cleaning
  • M22 Metric Male thread fitting
  • 1/4″ outlet quick disconect fitting
  • 5 piece of pressure washer nozzle tips
Most Frequently Asked Question:

1. This may look a bit silly but: does this unit eject the cleaning solution under pressure?

It sprays out a form. If you adjust it to a pin point it can reach probably 20 feet. So yes it is under pressure but not as much as using a 45 degree tip. This is on a 2200 PSI pressure washer.

2. Will this unit be acceptable for washing vinyl siding and how high could one expect to spray up a vertical wall with one of the tips? Thank you.

It’s adjustable but depends on the psi of your pressure washer. I have mine hooked up to 1600 psi and it still gets 20-30 feet of distance when shot vertically. I have enough reach to hit second story no problem.

3. Can the soap valve be turned off for water only

If you need water only, you can remove the foam cannon and replace it with water nozzle. Thank you very much.

4. Will this work with a homelite power washer

I’m see no reason that it wouldn’t fit your power washer, it’s a standard size and style attachment. And in the “very slim” chance it didn’t, Amazon is the best at helping its customers with any issues they may encounter.
What Real Customers Say About This Product?

PK9394Top Contributor: Cycling says: “Final Update I have this cannon since Jun 2018 and use it over 50+ times. everything still work as it should no complaint at all. No leaking or anything, just work as the first day. Some rust build up on some of the nozzles connection, the cannon itself is still in great shape! Great buy! ————- First review: I have use this cannon for only two time so far and the result is great! it does give a thick foam, and the foam can stay and last about 3 to 4 minutes on the car surface. I pick this package is
Final Update
I have this cannon since Jun 2018 and use it over 50+ times. everything still work as it should no complaint at all. No leaking or anything, just work as the first day. Some rust build up on some of the nozzles connection, the cannon itself is still in great shape! Great buy!

————-
First review:
I have use this cannon for only two time so far and the result is great! it does give a thick foam, and the foam can stay and last about 3 to 4 minutes on the car surface. I pick this package is because it comes with these extra nozzle tips. the first wash I use Chemical guy honeydew snow foam, and the second wash I use Griots garage 10866 pink color soap. and the electric power washer is 1800psi they both give a thick foam and perform very well! Overall for the price and performance is worth it!

The cannon did not comes with any instructions or guide to use the mixture of the soap, This is my own measurement, to wash a large size SUV (BMW X5), I use 150ml soap and top up with water (900ml). for small car (Fiat 500) I use 100ml soap and add water to 600ml mark. Both setup I can completely cover the car and wheels with foam when the bottle run empty..


Show More…

16. Tool Daily Deluxe Pressure Washer Gun, with Replacement Wand Extension, 5

Tool Daily Deluxe Pressure Washer Gun, with Replacement Wand Extension, 5 Nozzle Tips, M22 Fitting, 40 Inch, 5000 PSI

  • ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly”. Max pressure is up to 5000 PSI. Max flow rate is 8 GPM. Max Temperature of water is rated to 60℃ / 140 F. Pressure washer guns have M22 fitting, compatible with M22 14mm and M22 15mm fitting. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer.
  • If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose.
  • Replacement pressure washer gun has three lengths to use. Three Length: 40 inch, 25 inch, 8.8 inch. Pressure washer wands are compatible with almost gasoline powered and electric powered pressure washers.
  • Pressure washer wand extension has 1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation.
  • Pressure washer gun kit has 5 nozzles. Pressure washer nozzles have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to your needs.
Most Frequently Asked Question:

1. Will it fit a gas Exell vr2522 ?

yes, it fits. please use the brass coupler attached.

2. Will this work on a ryobi 2900 psi gas pressure washer

yes, it works.

3. Will this fit a troybilt 020207 model 2450 psi?

yes, it fits.

4. Does it fits a green works 1600 psi?

Fit my Ryobi just fine and they are the same as Greenworks. 30 day return too.
What Real Customers Say About This Product?

MacEgel says: “I just had to write this. If all imported items were of this quality, we wouldn’t have any complaints. The washer gun that I received was, if anything, better than described. All fittings were solid brass. The plastic items were heavily cast from a durable solid plastic- actually far better quality than the OEM pressure gun this is replacing, which was made of thin hollow plastic parts. This gun looks like the only thing that will break it is driving over it with the car! When I initially tried to connect it with the M22 fitting on my pressure hose, it
I just had to write this. If all imported items were of this quality, we wouldn’t have any complaints.

The washer gun that I received was, if anything, better than described. All fittings were solid brass. The plastic items were heavily cast from a durable solid plastic- actually far better quality than the OEM pressure gun this is replacing, which was made of thin hollow plastic parts. This gun looks like the only thing that will break it is driving over it with the car!

When I initially tried to connect it with the M22 fitting on my pressure hose, it was apparent that although the thread diameter was correct, the internal diameter was too small. Oh-oh! But no worries- a solid brass adapter fitting was thoughtfully provided to accommodate the hose. Also included were a selection of extra o-rings and more nozzles than my pressure washer came with new. Needless to say, I’m delighted!.


Show More…

18. Sooprinse High Pressure Washer Gun,3000 PSI Max with 5 Color Quick

Sooprinse High Pressure Washer Gun,3000 PSI Max with 5 Color Quick Connect Nozzles M22 Hose Connector 3.0 TIP

  • ❤【Premium Quality】The gun body is made of engineering plastic, internal structure is brass and stainless steel, which is strong and durable,ensures working normally at 3000PSI Maximum.
  • ❤【Package Include】Includes high pressure washer gun,5 spray nozzles tips creating 5 patterns for a variety of uses.
  • ❤【Good Compatibility】1/4 inch outlet quick disconnect fitting,M22-14 Thread inlet fitting (inside diameter 14mm).
  • ❤【Special Improvement】There’s a locking safety handle to prevent accidental sprays.
  • ❤【Quality Assurance】With 3 years product warranty .Any problem,feel free to contact us.The professional team is always ready to serve you.
Most Frequently Asked Question:

1. Can you unscrew the quick release to attach a wand to the handle?

NO, but if is a most useful device for close in work. Just hold on tight and wear protective glasses.

2. Will fit a greenworks 2000 psi electric washer ?

You need to check if your hose it’s 14 mm, like one of the pictures show’s the real fitting.

3. What is the size orifice in this gun?

It’s adjustable, but i’ve been unable to get a lite coverage. I prefer the heavy coverage to minimize any abrasion.

4. how do i get in contact with after sales support?

Good question
What Real Customers Say About This Product?

Dylan P. says: “I was definitely on the fence between keeping my original 2-3ft wand that came with the SunJoe SPX3000 pressure washer, upgrading to an MTM gun, or finding an affordable alternative like this. Well, after more car washes with the SunJoe wand, I decided to make a decision and buy this gun. Now realize that you need more than just this to connect it to some pressure washers, including the SunJoe: The hose coming off the SunJoe models has an M22-15mm fitting, different than a lot of other hoses and guns on the market, which either use an M22-14mm or 3/8” fitting.
I was definitely on the fence between keeping my original 2-3ft wand that came with the SunJoe SPX3000 pressure washer, upgrading to an MTM gun, or finding an affordable alternative like this. Well, after more car washes with the SunJoe wand, I decided to make a decision and buy this gun. Now realize that you need more than just this to connect it to some pressure washers, including the SunJoe:

The hose coming off the SunJoe models has an M22-15mm fitting, different than a lot of other hoses and guns on the market, which either use an M22-14mm or 3/8″ fitting. This gun has the M22-14mm fitting, so I needed to buy this adapter (Mingle Pressure Washer Coupler, Metric M22 15mm Male Thread to M22 14mm Female Fitting, 4500 PSI). It has the M22-15mm male end that goes into the SunJoe hose and the M22-14mm female end that goes into the gun side. A dab of grease on the o-ring, teflon tape on the threads, and tighten til it won’t tighten anymore!

The gun itself works as advertised and I don’t notice any changes in performance compared to the stock wand besides being very short and easy to maneuver. There is 1 more adapter than stock, and the lack of swivel is troubling, but this is the same as the stock gun so I’m not really changing much besides barrel length. I plan to use this solely for car washes, so I’m ok not having a swivel or any fanciness. If I did this for a career, I’d buy a much nicer gun, get a swivel if it didn’t have one, add quick disconnects, etc. For the home DIYer, this works perfectly fine and gets the job done. Foam cannon and stock tips fit into the gun quick connect.

In the package, you get the gun, 5 tips of varying angles, an extra 0-ring for the tip’s quick connect (which is removable and replaceable if you needed to), and nothing more. No instructions were included, though by the time I did a few hours research watching comparisons and videos about guns and the plethora of adapters I may need, I knew enough about how to assemble and use the gun.

My couple complaints (minor) are that the trigger lock is flimsy and doesn’t stay stuck to the trigger when using the gun, and the plastic construction feels a bit cheap. The claimed 3 year warranty by the seller is nice, though if the gun is used once every couple months for me, I probably won’t need the warranty. First impressions are good, so will update if anything changes!.


Show More…

We use standardized and scientific proven testing methods to scrutinize every product and provide you with objectively accurate results. If you’re looking for a Pressure Washer Gun , this post is the right place for you. If you’ve found different results in your own research, email us and we’ll compare notes.

Leave a Comment