10 Best strongway hydraulic shop press Reviews and Guide 2020

If you have been searching for the strongway hydraulic shop press then you have come to the right place. For this post, I have put together a collection of the best strongway hydraulic shop press currently available.

strongway hydraulic shop press

Are you still confused for how to select top strongway hydraulic shop press? Then don’t buy before you read this review and guide. Compare and choose the best from our selection.

Take your time in reading through this strongway hydraulic shop press review and trust that you would find the best that you would need.

First, let’s take a look at the top-rated strongway hydraulic shop press, then we’ll read our full research review below to select the best product.

Image Product Name Rating Price
USER FRIENDLY

Strongway 40-Ton Pneumatic Shop Press with Gauge and Winch

Strongway 40-Ton Pneumatic Shop Press with Gauge and Winch

Features: ,

5.0
Check Price
EDITOR’S CHOICE

Baileigh 30-Ton Air/Hand-Operated H-Frame Shop Press (HSP-30A)

Baileigh 30-Ton Air/Hand-Operated H-Frame Shop Press (HSP-30A)

Features: 30-TON CAPACITY: Uses industrial-grade hydraulic components for , MANUAL CONTROL OPTION: For precise control on , INCLUDES A SET OF V-BLOCKS: This H-frame

4.8
Check Price
BUDGET PICK

Strongway Hydraulic Engine Hoist with Load Leveler - 2-Ton Capacity, 1in.-82

Strongway Hydraulic Engine Hoist with Load Leveler – 2-Ton Capacity, 1in.-82

Features: Constructed of high-grade steel and built to , Lead-free paint finish is applied after a , Paint is oil, grease and dirt-resistant for

4.2
Check Price
MY CHOICE

Dragway Tools 6-Ton Hydraulic Shop Floor Press with Press Plates and

Dragway Tools 6-Ton Hydraulic Shop Floor Press with Press Plates and

Features: Open construction allows work on long pieces. , Bolted adjustable cross beams raise and lower , Heavy-duty springs quickly return the ram.

3.8
Check Price
TOP PICK

Baileigh 10-Ton H-Frame Hydraulic Shop Press (HSP-10H)

Baileigh 10-Ton H-Frame Hydraulic Shop Press (HSP-10H)

Features: 10-TON MAXIMUM CAPACITY: Can handle the toughest , INCLUDES A SET OF V-BLOCKS , 13.5-INCH WORK OPENING AND 7-INCH STROKE: Can

3.5
Check Price
HONEST PRODUCT

Strongway 22-Ton Quick Lift Air/Hydraulic Service Floor Jack

Strongway 22-Ton Quick Lift Air/Hydraulic Service Floor Jack

Features: Constructed of high-grade steel and built to , Lead-free paint finish is applied after a , Paint is oil, grease and dirt-resistant for

3.5
Check Price
No #1 PRODUCT

Strongway Benchtop 10-Ton Hydraulic Shop Press with Gauge

Strongway Benchtop 10-Ton Hydraulic Shop Press with Gauge

Features: Heavy-duty H-frame constructed of high-grade steel and , Lead-free paint finish is applied after a , Paint is oil, grease and dirt-resistant for

3.2
Check Price
FOR THE MONEY

Strongway 20-Ton Hydraulic Shop Press

Strongway 20-Ton Hydraulic Shop Press

Features: Heavy-duty H-frame constructed of high-grade steel and , Lead-free paint finish is applied after a , Paint is oil, grease and dirt-resistant for

2.9
Check Price
FOR YOU

Strongway 20-Ton Hydraulic Shop Press with Gauge

Strongway 20-Ton Hydraulic Shop Press with Gauge

Features: Heavy-duty H-frame constructed of high-grade steel and , Lead-free paint finish is applied after a , Paint is oil, grease and dirt-resistant for

1.7
Check Price
Cheap Product

Strongway 20-Ton Hydraulic Shop Press

Strongway 20-Ton Hydraulic Shop Press

Features: Heavy-duty H-frame constructed of high-grade steel and , High quality large diameter hydraulic steel cylinder , Hydraulic pump is constructed of QT450 Nodular

0
Check Price

Best strongway hydraulic shop press For You (Updated)

Below we have reviewed the best strongway hydraulic shop press. From these products you can choose the product of your choice if you want.

1. Strongway 40-Ton Pneumatic Shop Press with Gauge and Winch

Most Frequently Asked Question:

1. Is this American Made I hope

This shop press is manufactured in China.
What Real Customers Say About This Product?

Ron Jellison says: “Not just because it was half the price of my local tool store but it really is a good tool!
Not just because it was half the price of my local tool store but it really is a good tool!.

Show More…

3. Baileigh 30-Ton Air/Hand-Operated H-Frame Shop Press (HSP-30A)

The Baileigh HSP-30A pneumatic shop press features a ridged, fully-welded main frame, allowing the operator to use the full 30 tons of force! Industrial-grade, hydraulic parts ensure smooth, dependable use for years. The cylinder can move left and right within the frame, depending on the orientation of the job. You also have the option to work the HSP-30A manually if you need finer control.The working width of this shop press is 21-3/16 inches, and the cylinder stoke is 5.9 inches.

This shop press includes its own standard set of V-blocks, making this H-frame shop press a great value. Furthermore, Baileigh covers this shop press with a one-year parts warranty and lifetime technical support by phone. This H-frame shop press is ready to tackle the toughest jobs. Baileigh covers this H-frame press with a one-year parts warranty and lifetime technical support by phone.

Baileigh 30-Ton Air/Hand-Operated H-Frame Shop Press (HSP-30A)

  • 30-TON CAPACITY: Uses industrial-grade hydraulic components for years of worry-free use.
  • MANUAL CONTROL OPTION: For precise control on delicate jobs.
  • INCLUDES A SET OF V-BLOCKS: This H-frame is a great value.
  • CYLINDERS MOVE BOTH LEFT AND RIGHT: Choose the orientation of your job.
  • FULLY-WELDED STEEL MAIN FRAME: Eliminates flexing at full force to deliver accurate results.
Most Frequently Asked Question:

1. How wide is the work table “grey metal” Looks like 8 inches or so? Cannot find in website

Going off the picture, if you are talking about the flat piece of steel on the bridge, it is actually 2 black 5″x8″ reversible blocks, one side flat, the other with a perch with a V notch. Both have 4 corner reversible pins to keep them from sliding off the cross bridge. The space between the uprights is 21″, the gap in the middle of the bridge is 6 3/8″ with overall depth of 7 1/4″

2. How fast does it press?

It’s a quality press. It will press as fast as the air supply allows.

3. How far down does it go? I am needing to press into the bottom of a five gallon stainless container that is basically a five gallon bucket.

It has about a 6″ throw. The table is adjustable about 5 feet. The press head also slides from side to side 22″.

4. is it made in the usa ?

When I purchased mine two years ago, it was not. It is however, very well made.
What Real Customers Say About This Product?

Johny Walker says: “Ok, so I’m a tool guy. In my shop I maintain six 1,000lb + machines. I did the research, looked at all the different brands. Most presses looked fricken scary! True, right? Anyway, have no worries about the quality of this 30T. I’m surprised at just how well this machine is built. Everything from high quality steel to a tough paint coat. Every part on this press is thought out, making It a joy to work with. The packaging was fantastic and assembling was simple. I know,. sounds to good to be true. Now, I’m going to go crush something. Lol
Ok, so I’m a tool guy. In my shop I maintain six 1,000lb + machines. I did the research, looked at all the different brands. Most presses looked fricken scary! True, right? Anyway, have no worries about the quality of this 30T. I’m surprised at just how well this machine is built. Everything from high quality steel to a tough paint coat. Every part on this press is thought out, making It a joy to work with. The packaging was fantastic and assembling was simple. I know,. sounds to good to be true. Now, I’m going to go crush something. Lol.

Show More…

5. Strongway Hydraulic Engine Hoist with Load Leveler – 2-Ton Capacity, 1in.-82

Strongway Hydraulic Engine Hoist with Load Leveler – 2-Ton Capacity, 1in.-82 5/8in. Lift Range

  • Constructed of high-grade steel and built to exacting standards for quality and durability
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life
  • Piston-ram is treated and polished to resist skiving
Most Frequently Asked Question:

1. can i use this for a b series honda motor?

My son has a S2000 motor on his. Not sure if this is similar

2. How long can the boom extend out?

The engine hoist has 4-hole position reinforced boom to enable 4 different lengths and 4 load capacities: 35 7/16in.L/1/2-ton capacity; 42 1/8in.L/1-ton capacity; 48 13/16in.L/1 1/2-ton capacity; 55 1/2in.L/2-ton capacity.

3. How high does this hoist lift-from ground to max. height?

Max height is about 5-6ft for the lift arm but the engine will be lower around 4ft if I remember rite

4. clearance for legs

The measurement from the bottom of the caster to the top of the base support tube measures 7-1/2″.
What Real Customers Say About This Product?

EL says: “Decent price, good quality, no missing hardware. Boxes are super heavy, delivered by freight. The freight company, Yellow, dorked up the shipping/delivery quite badly. But, I got it eventually… Good product. Took about an hour to assemble. You’re dealing with large nuts and bolts and heavy stuff. But, my opinion is; if you can’t put this thing together you shouldn’t be using it! 😉 folds up nicely for storing. Oh, the leveler that comes with it is priceless for certain jobs. The plastic knob on the handle sucks though. I will be fabricating something strong to replace it.
Decent price, good quality, no missing hardware.

Boxes are super heavy, delivered by freight. The freight company, Yellow, dorked up the shipping/delivery quite badly. But, I got it eventually…

Good product. Took about an hour to assemble. You’re dealing with large nuts and bolts and heavy stuff. But, my opinion is; if you can’t put this thing together you shouldn’t be using it! 😉 folds up nicely for storing. Oh, the leveler that comes with it is priceless for certain jobs. The plastic knob on the handle sucks though. I will be fabricating something strong to replace it..


Show More…

7. Dragway Tools 6-Ton Hydraulic Shop Floor Press with Press Plates and

6 Ton Hydraulic Bench Top Shop Press with Press Plates. Remove and Install Bushings, Bearings, Gears, Ball Joints, U Joints, Pulleys and Gears. The red Powder Coated Finish will Look Great in your Shop for Years to come. (2) 5.25″ x 2.75″ Press Plates are included to do a variety of work. Easily sets on your Bench creating an Ideal working Height. Open-sided construction allows work on the longest work pieces Bolted Adjustable Cross Beams easily raise and lower for an Ideal working distance Heavy Duty Springs Quickly Return you Ram.

Made from Premium 2-1/4″ Tube Steel .200 Thick 10″ x 1″ Press Plate Bar: Perfect size for Bushings and Bearings (2) Press plates 5.25″ x 2.75″ x .500 thick Base Foot Print and Dimensions: 15-1/4” (W) x 19-3/4”(D) 36-1/2 (H) Capacity: 6 tons (12,000 Lbs) Overall height: 36-1/2” Working distance (width): 12″ inches Working distance (height):2” -10″ inches Weight: 60 1 Year Full Warranty

Dragway Tools 6-Ton Hydraulic Shop Floor Press with Press Plates and H Frame is Ideal for Gears and Bearings

  • Open construction allows work on long pieces.
  • Bolted adjustable cross beams raise and lower for an ideal working distance.
  • Heavy-duty springs quickly return the ram.
  • Press plate bar is perfect size for bushings and bearings.
  • Includes (2) two press plates
Most Frequently Asked Question:

1. Is the jack removable? Can I use my 10 ton jack in the frame?

Yes the jack is removable. You should be cautioned that the h-frame is designed for handling the pressure a 6 ton jack exerts. Increasing to a 10 ton jack may be too much.

2. Fee shipping to Canada?

We do not have free shipping to Canada.

3. When using this device, do you have to turn the little air release valve on the jack to get it to reset back?

I assume you are talking about the hydraulic fluid release valve. Yes this must be turned to allow the hydraulic fluid to go back into the reservoir. Hand pressure may be necessary to return the piston all the way. Don’t forget to tighten the valve before using it to press anything.

4. Is it just a frame?

Includes the frame, plates and 6 ton jack. This is a very poorly constructed unit. If I had a 20 ton jack I would put this junky 6 ton unit in it and crush it. It would however might a pretty good boat anchor. Don’t waste your money.
What Real Customers Say About This Product?

Dan says: “This 6-ton press came in pretty fast, considering free shipping as far as to hawaii. Assembly was fast and easy. A 19mn socket and wrench did it for me in just a few minutes. In less than 30 minutes of its arrival, i pressed out my first control arm bushing. How is that for a cheap press? The amount that it cost me has paid it self up in less than 30 mins of use. The dealer of my car sells only the entire control arm, which is more than the price of this small 6-ton press. By the time that
i finished replacing all the bushings, the amount that i saved is tremendous. What i like the most about this press? – its small, affordable,strong, and really works. Dislikes- nothing, except that now im searcing around for things that i could press out.
Update: twelve rear suspension bushings out and in with new ones. Easy!.

Show More…

9. Baileigh 10-Ton H-Frame Hydraulic Shop Press (HSP-10H)

With fully-welded steel construction and industrial-grade hydraulics, this small, manually-powered, H-frame press can tackle tough projects, and will last for years. This shop press features a 10-ton maximum capacity. A 13.5-inch work opening, and large 7-inch stroke, can accommodate many different applications. The cylinder moves left or right within the frame of the press, so you can apply pressure to the exact spot where you need to. A removable ram cap allows you to use a wide variety of tooling.

Finally, the press includes its own set of V-blocks. Baileigh covers this hydraulic shop press with a one-year parts warranty and lifetime technical support by phone.

Baileigh 10-Ton H-Frame Hydraulic Shop Press (HSP-10H)

  • 10-TON MAXIMUM CAPACITY: Can handle the toughest of jobs.
  • INCLUDES A SET OF V-BLOCKS
  • 13.5-INCH WORK OPENING AND 7-INCH STROKE: Can accommodate many different applications.
  • CYLINDER MOVES LEFT OR RIGHT WITHIN THE FRAME: Apply pressure to the exact needed spot.
  • REMOVABLE RAM CAP: Allows you to use a wide variety of tooling.
Most Frequently Asked Question:

1. How wide is the actual working area of the press from left to right ? Will 23″ circle disk fit to the center ?

13 1/4 inches

2. can you hook a air powered hydraulic foot pedal to it instead of the hand pump?

My husband purchased this a few months ago and says no it would require a different system. His experience, Senior Mechanic/Fabricator-welder.

3. can it press 2inch x 4inch bricks

You can press 12″ x 12″ bricks if you want. Why do you need a hydraulic press for bricks anyway?

4. What is the pressing ram diameter exactly?

1 9/16″
What Real Customers Say About This Product?

William C. Stewart says: “Excellent
Excellent.

Show More…

11. Strongway 22-Ton Quick Lift Air/Hydraulic Service Floor Jack

Strongway 22-Ton Quick Lift Air/Hydraulic Service Floor Jack

  • Constructed of high-grade steel and built to exacting standards for quality and durability
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
  • Piston-ram is treated and polished to resist skiving
Most Frequently Asked Question:

1. Will this jack work with forklifts?

What kind of forklift?

2. What is the lowest heigth it will go under?

The minimum height will be 8.44″.

12. Strongway Benchtop 10-Ton Hydraulic Shop Press with Gauge

This 10-Ton Capacity Strongway Hydraulic Shop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. Adjustable lower bolster.

Some assembly required. Tested for reliability and safety to meet ASME ASP 2010 standards. Winch Included: No, Stroke Length (in.): 6 7/8, Dimensions L x W x H (in.): 23 3/16 x 17 11/16 x 41 15/16, Continuous Force (Tons): 10, Bed Opening (in.): 4.33, Inside Bed Dimensions L x W (in.): 4 5/16 x 13 3/8, Working Range (in.): 0-13 3/4

Strongway Benchtop 10-Ton Hydraulic Shop Press with Gauge

  • Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
  • Piston-ram is treated and polished to resist skiving
Most Frequently Asked Question:

1. Possible to hook up air compresser to this?

No

2. If I order this crash is it going to come in in pieces and a mess like the pictures and their reviews?

Most likely

3. what is the diameter of the steel cylinder ?

2 inch diameter

13. Strongway 20-Ton Hydraulic Shop Press

This 20-Ton Capacity Strongway Hydraulic Shop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Adjustable lower bolster. Some assembly required. Tested for reliability and safety to meet ASME ASP 2010 standards.

Dimensions L x W x H (in.): 25 7/8 x 29 1/2 x 48 7/8, Inside Bed Dimensions L x W (in.): 25 1/2 x 5 7/8, Working Range (in.): 0-39 1/3, Continuous Force (Tons): 20, Stroke Length (in.): 5 1/2, Bed Opening (in.): 24 3/8, Winch Included: No

Strongway 20-Ton Hydraulic Shop Press

  • Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
  • Piston-ram is treated and polished to resist skiving
Most Frequently Asked Question:

1. What is the distance between the bed rails. 4 in. 7in?

4, go to harbor freight , mine broke third time pressing a wheel bearing for a Honda civic.. not worth the money
What Real Customers Say About This Product?

Andre Arrindell says: “This machine is freaking awesome make life easy
This machine is freaking awesome make life easy.

Show More…

15. Strongway 20-Ton Hydraulic Shop Press with Gauge

This 20-Ton Capacity Strongway Hydraulic Shop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. Adjustable lower bolster.

Some assembly required. Tested for reliability and safety to meet ASME ASP 2010 standards. Bed Opening (in.): 3 15/16, Continuous Force (Tons): 20, Working Range (in.): 35 13/16, Stroke Length (in.): 7 1/4, Inside Bed Dimensions L x W (in.): 3 15/16 x 21 1/4, Winch Included: No, Dimensions L x W x H (in.): 25 3/16 x 27 9/16 x 71 1/4

Strongway 20-Ton Hydraulic Shop Press with Gauge

  • Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
  • Piston-ram is treated and polished to resist skiving
Most Frequently Asked Question:

1. Does it come with the press plates ??

The hydraulic shop press would include 2 press plates.

16. Strongway 20-Ton Hydraulic Shop Press

Strongway 20-Ton Hydraulic Shop Press

  • Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life Piston-ram is treated and polished to resist skiving Piston-ram utilizes a Y-Style polyurethane sealing ring with backup ring, preventing load from falling slowly or bypassing oil drift
  • Hydraulic pump is constructed of QT450 Nodular Iron which has a higher strength than other types of iron resulting in greater durability Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees F and 105 degrees F Integrated overload protection valve keeps from overloading the system
  • Extra-long handle included for easy pumping force Built in ISO certified facilities and engineered using the same systems as Aerospace Technologies and the Automotive OEM sector Meets ASME ASP 2010 standards

If you’re looking for a strongway hydraulic shop press , this post is the right place for you. comes with a easy nonstick coating. If you think I left out one that is important or have a suggestion for a future article, let me know in the comments below.

Leave a Comment